Joy Technology Co.,Limited

General technical requirements:
1. Frame: The frame size is determined according to the requirements of the printing machine. Take the DEK265 and MPM UP 3000 models as an example. The frame size is 29ˊ 29ˊ, and the aluminum alloy frame size is 1.5ˊ 1.5ˊ.

2, stretch net: the use of red plastic + aluminum tape, in the aluminum frame and the glue joint, must be evenly scraped with a layer of protective paint. At the same time, in order to ensure sufficient tension and good flatness of the stencil, it is recommended that the stainless steel plate retain 25mm-50mm from the inner side of the frame.

3. Reference point: According to the size and shape provided by the PCB data, it is opened in a 1:1 manner and is semi-transparent in the reverse side of the printing. At the corresponding coordinates, the entire PCB is opened at least two reference points.

4. Opening requirements: 1.41. The position and size ensure high opening accuracy and open in strict accordance with the specified opening. 1.42. The size of the independent opening should not be too large, the width should not be greater than 2mm, and the 0.4mm bridge should be placed in the middle of the pad size larger than 2mm, so as not to affect the strength of the stencil. 1.43. The open area must be centered. correction I

5, characters: For the convenience of production, it is recommended to engrave the following characters in the lower left or lower right corner of the stencil: Model; T; Date; stencil production company name.

6. Thickness of the stencil: In order to ensure the printing amount and welding quality of the solder paste, the surface of the stencil is smooth and uniform, and the thickness is uniform. The thickness of the stencil refers to the above table, and the thickness of the stencil should meet the requirements of the finest pitch QFP BGA. For example, there are 0.5mmQFP and CHIP 0402 components on the PCB, and the thickness of the stencil is 0.12mm; if there are 0.5mmQFP and CHIP 0603 components on the PCB, the thickness of the stencil is 0.15mm.




DEK CBA40 GOLD CAMERA 191012 8008632
DEK CBA40 GRAPHITE CAMERA 191010 8008629
DEK CBA40 GRAPHITE CAMERA 198040 8012979
DEK CBA40 GRAPHITE CAMERA 8008629
DEK CBA40 GREEN CAMERA 191011 8008630
DEK CBA40 GREEN CAMERA 191641 8008630
DEK CBA40 GREEN CAMERA 198041 8012980
DEK CBA40 GREEN CAMERA 198811 8008630
DEK CBA40 HAWKEYE 1200 CAMERA 191644 8008634
DEK CBA40 HAWKEYE 1700 CAMERA 198044 8012983
DEK CBA40 HAWKEYE 400 CAMERA 191643 8008633
DEK CBA40 HAWKEYE 750 CAMERA 198043 8012982
DEK CBA40 HAWKEYE CAMERA 191013 8008633
DEK EUROSYSTEM 114546 GREEN LIGHT
DEK EUROSYSTEM 114546 RED LIGHT
DEK EUROSYSTEM 114547 GREEN LIGHT
DEK EUROSYSTEM 114547 RED LIGHT
DEK GSX CHASSIS
DEK HOZ ADV CPU CARD
DEK HOZ ARCON CPU CARD
DEK HOZ BLUECHIP CPU CARD
DEK INFINITY VISION CARD 160903
DEK MOTOR 107707
DEK MOTOR 119943
DEK MOTOR 133126
DEK MOTOR 133129
DEK MOTOR 140373 S644-3A+RM21-1000+PULLEY
DEK MOTOR 140737 COPY
DEK MOTOR 140737 S644+ENC+PULLEY+CONNS



DEK MOTOR 107707
DEK MOTOR 119943
DEK MOTOR 133126
DEK MOTOR 133129
DEK MOTOR 140373 S644-3A+RM21-1000+PULLEY
DEK MOTOR 140737 COPY
DEK MOTOR 140737 S644+ENC+PULLEY+CONNS
DEK CAMERA 133828
DEK CAMERA 145016
DEK CAMERA 145550
DEK CAMERA 145550,181062
DEK CAMERA 155826  (new)181322
DEK CAMERA 181056
DEK CAMERA 181062
DEK CBA40 GRAPHITE CAMERA 191640 8008629
DEK CBA40 CAMERA
DEK CBA40 GOLD CAMERA 191012 8008632
DEK CBA40 GRAPHITE CAMERA 191010 8008629
DEK CBA40 GRAPHITE CAMERA 198040 8012979
DEK CBA40 GRAPHITE CAMERA 8008629
DEK CBA40 GREEN CAMERA 191011 8008630
DEK CBA40 GREEN CAMERA 191641 8008630
DEK CBA40 GREEN CAMERA 198041 8012980
DEK CBA40 GREEN CAMERA 198811 8008630
DEK CBA40 HAWKEYE 1200 CAMERA 191644 8008634
DEK CBA40 HAWKEYE 1700 CAMERA 198044 8012983
DEK CBA40 HAWKEYE 400 CAMERA 191643 8008633
DEK CBA40 HAWKEYE 750 CAMERA 198043 8012982
DEK CBA40 HAWKEYE CAMERA 191013 8008633

EXTRUSION ASSEMBLY (520 LG) DEK DEK 157679
EXTRUSION ASSEMBLY (400 LG) DEK DEK 157678
EXTRUSION ASSEMBLY (300 LG) DEK DEK 157677
CASSETTE TYPE MANIFOLD^5/2 VALVE DEK 188760
CASSETTE TYPE MANIFOLD^3/2/DUAL VALVE 188759
DRIVE BELT^RAIL WIDTH DEK 185938
DRIVE BELT^TABLE LIFT DEK 185934
DEK Q-250D
COVERS SYSTEM SWITCH LOOM BOM DEK DEK 163512
BELT, TIMING (16T10/1970), PAIR DEK 129250
BELT, TIMING (16T10/2350) DEK 129268
PRINT CARRIAGE MOTOR ( TXT ) DEK 133126
X' CAMERA MOTOR DEK 133127
CAMERA 'X' MOTOR AT/20' / DEK 145817
CAMERA 'Y' MOTOR (WITH CONNECTORS) DEK 133128
TABLE LIFT MOTOR DEK 133129
ACTUATOR "X"REAR LOOM BOM(TXT) DEK 119715
Y' GEAR PULLEY DEK 145511



BELT^TIMING 'Y' TRANSFER ( TXT ) DEK 145513/157936
REAR DAMPER, 235N DEK 140584
DRIVE BELT^PRINT CARRIAGE^ (TXT) DEK 185935
BELT^FLAT^ESD^NON-FRAYING DEK 178310
BOM^LIQUID LEVEL SENSOR^SOLVT TANK^USC ( TXT ) DEK DEK181161
DRIVE BELT^CAMERA Y^STD (TXT) DEK 188681
DRIVE BELT^CAMERA X^STD (TXT) DEK 188682
BELT ,TIMING (6T5/185) DEK G1140
BOARD AT LEFT OPTO LOOM DEK () DEK 119747
BOARD AT RIGHT OPTO LOOM DEK ()DEK 119746
ARMATURE PLATE(25 DIA) DEK 107332
IKO LINEAR BEARING LWES20. X DEK 165226
DEK CYLINDERSMC CQ2B20-10S DEK 107181
SWITCH DEK E0008
Opto Spacer Camera Mount DEK 112256
Side Plate DEK 112788
Spring Post DEK 107452
Top Plate DEK 107451
LAMP^PASTE ROLL EA DEK 188232
TABLE BRAKE MOUNTING BRACKET(TXT) DEK 157111
BEARING CAP 107298
LINK COLLAR - BALL SCREW NUT DEK 145311
DEK CBA40

If there is no matching model of DEK Parts,pls contact us directly.
JOYSMT have good source & large stocks for major brand SMT Parts and Equipment. 
Such as SMT nozzle | nozzle holder | nozzle shaft,  SMT feeder|SMT feeder parts|Feeder calibartion jig, 
Laser ,Sensor, Servo Motor, Servo Driver, Controller Board Card, Solenoid valve,Ejector, Ball screw, 
SMT Belt, Cable, SMT Filter, SMT consumable Material etc.