Joy Technology Co.,Limited

Product description Juki feeder carts /Juki storage feeder carts
Specifications
1.For JUKI feeders
2.Material:Made by Alluminum Alloy 
3.Structure: Two layers,40pcs per layer
4.Dimension:Lx W x H=800 x 600 x 1100 mm, 
5.With four metal flexible castor
Features and Priority
1. The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling.
 
2. When its time to prepare for the next job, the same carts can be used to “pre-kit” the placement systems tape feeder load in positive latching feeder locations using the same numbering system as used on your placement machine.
 
3. When its time to change over to the next job, the cart is moved to the correct placement system, existing feeders on the assembler are moved to an unused shelf on the cart and the “prekitted” feeder set move from the numbered slots on the cart to the same number slot on the machine.
 
4.  You can even dedicate on cart for use when removing the tape feeders from the previous job and another for the current set-up minimizing changeover time

Product weight: about 18KG
Applicable models: JUKI FEEDER universal, 32MM above specifications can not be stored

1.Short lead time; 
2.Quality guaranteed. 
3.All size and model available.

Uses:
For the storage of feeder and feeder in advance preparation, feeder turnover storage, improve production efficiency. Widely used in SMT production workshop, feeder turnover and placement, stable placement, free to take, move or fixed at will. 
 
Texture of material:
Made of stainless steel, the structure is designed with high hardness square. The body is light, strong and durable. 4 pcs of universal casters, two with brake, two movements, easy to move.
 
Quality:
It adopts advanced welding technology to weld and replace the traditional manual welding method. The cutting surface is fine, welding without welding, neat and hairless, and the frame is not deformed after being filled. The whole is firm, light, firm and durable;
 
Technology:
Die punch made of steel plate feeder positioning plate, and mounter FEEDER platform placed Feida principle, to achieve the four point positioning perfect, top with large arc, avoid sharp, design is divided into two layers, Feida installed after the beautiful appearance, equipped with anti-static grounding chain, effective.
 
FEEDER car features:
FEEDER car uses stainless steel material to process, the body strong, lightweight, durable, flexible, overall FEEDER placing platform adopts the manual welding process, installation of anti-static towline, can be moved freely, with brake device. It can be divided into two layers and can be loaded with 80 FEEDERS. Widely used in SMT production workshop, FEEDER turnover and placement, stable placement, take and release free, greatly increasing the production efficiency. Are made of stainless steel and aluminum production.