How to reduce the occurrence of Samsung SM471 Placement Machine failure？
With the development of science and technology in 2020 and later,
more and more placement machines are appearing and being used.
China is now recognized as a big country for placement machines.
Therefore, Samsung's placement machine SM471 also has a rapid upward trend.
SMD function, if the cantilever's point hits an obstacle within the range of motion,
the obstacle will be treated or the cantilever will be damaged.
So release these obstacles before running the machine to ensure the safe operation of the machine.
However, this type of small LED placement machine, like this type of small LED placement machine,
the movement force is the cantilever, so as long as the obstacles of the cantilever are avoided,
the safety of the machine and materials can be greatly improved,
but Even professional staff may miss some details.
The following is a set of solutions compiled by the editor to share with everyone,
which can effectively reduce the occurrence of Samsung placement machine failures.
1) First, if the material rack is not covered, the height of the cover will be higher than the point of the cantilever of
the small LED chip mounter, which will cause the material rack and the cantilever to be damaged during the operation of the machine.
The consequences are very serious,
so it must be Make sure that all the covers are covered and that the material racks are also stable.
2) Secondly, it is the bulk box. The bulk box needs to be fixed.
If it is not fixed well, the height of the bulk box will exceed the cantilever* point.
The machine will also crash the machine during operation. Well fixed.
3), if the cover of the feeder is not covered, it will collide with the machine,
so make sure that the gland is fastened before starting to prevent collision.
Check the part name every week. Process Note Note that the suction nozzle fixture checks the buffering action.
If the action is not smooth, apply a thin layer of lubricant. If the fixture is loose, tighten it.
Move the lens to clean the dust and debris on the lens.
If you need any Samsung machine or parts,pls kindly contact us directly: joy@joysmt.com
Panasonic CM202 CM402 CM602 NPM Nozzle 110 115 KXFX0383A00
Samsung SM320 IC tray
YAMAHA FEEDER CALIBRATION JIG