Joy Technology Co.,Limited

- an overview, tutorial and information about the PCB design process or PCB layout process used for designing printed circuit boards for use in electronics equipment 

and the associated PCB CAD systems and PCB software.
Printed circuit boards, PCBs, form an essential part of any electronics equipment these days. The PCB design and layout forms an integral part of the design of the 
whole product, and it can be the key to the success of the product meeting its performance requirements in many instances.

PCB technology has progressed significantly in recent years. The design technology has improved with PCB CAD systems and PCB software to layout the boards better, and 
also analyse the performance under conditions such as the operation at high frequencies. In addition to this the technology for the manufacture of PCBs has improved 
enabling far smaller tracks to be used as well as incorporating features such as multilayer boards with blind vias, etc..

PCB design equipment
In the early days of PCBs, the design and layout was undertaken manually using tape that was placed onto a translucent film. These PCB designs were normally four times 
the required size and they were photographically reduced onto a 1:1 film for the PCB production process.
Nowadays the PCB design process has been computerised and there are many PCB CAD systems and PCB software packages that enable the PCB layout and design to be 
undertaken more efficiently than before. The PCB software varies considerably in price. Budget, or even free software provides the basic functions, whereas the top end 
packages enable many more facilities to be incorporated into the design. Simulations, complex routing, and many more facilities are available.

Circuit schematic capture
The first stage in the development of a PCB design is to capture the schematic for the circuit. This may be achieved in a variety of ways. Circuits may be entered into 
a schematic capture tool. This may form part of the PCB design suite, or it may be an external package whose output can be exported in a suitable format.
In addition to purely performing the schematic capture, simulations of the circuit may be undertaken at this stage. Some packages may be able to interface to 
simulation packages. For applications such as RF circuit design simulation of the circuit will enable the final circuit to be optimised more without building a 
prototype.

With the schematic capture complete the electronic design of the circuit is contained within the file and can be converted to what is termed a "netlist". The netlist 
is the interconnectivity information and it essentially the component pins and the circuit nodes, or nets, to which each pin connects.

PCB component placement
Before proceeding with the detailed PCB design and layout, it is necessary to gain a rough idea of where components will be located and whether there is sufficient 
space on the board to contain all the required circuitry. This will enable decisions about the number of layers needed in the board, and also whether there is 
sufficient space to contain all the circuitry may need to be made.
Once a rough estimate has been made of the space and approximate locations of the components, a more detailed component layout can be made for the PCB design. This can 
take into account aspects such as the proximity of devices that may need to communicate with each other, and other information pertaining to any RF considerations for 
example.

In order that components can be incorporated into the PCB design they must have all the relevant information associated with them. This will include the footprint for 
the printed circuit board pads, any drilling information, keep out areas and the like. Typically several devices may share the same footprint, so this information does 
not have to be entered for each component part number. However a library for all the devices used will be built up within the PCB layout design system. In this way 
components that have been used previously can be called up easily.


Routing
Once the basic placement has been completed, the next stage of the PCB design is to route the connections between all the components. The PCB software then routes the 
physical connections on the board according to the netlist from the schematic. To achieve this it will use the number of layers that are available for connections, 
creating via holes as required. Often one layer will be allocated for use as a ground plane, and another as a power plane. Not only does this reduce the level of 
noise, but it enables low source resistance connections to be made for the power.
The routing can use a significant amount of computing power. This is particularly true for larger designs where there may be upwards of three or four thousand 
components. Where routing is difficult as a result of high component density, this can result in the routing taking a significant amount of time.

PCB files
The information for the photo plots of the PCB layout are outputted in the form of Gerber files. This format is the standard for PCB files and they are a form of 
numerical control file that is used by a photo plotter. In addition to the Gerber files, drill information is also generated along with the screen print and photo-
resist information.

One major element in the cost of a printed circuit board is the drilling. In any design some holes are required for fixing as well as those required for any 
conventional components needed. However to reduce costs it is wise to use as few hole sizes as possible. In this way the drill will need changing less and time can be 
reduced.


PCB overview
Once complete the information for the PCB will be used in many areas of the manufacturing process. Not only will it be used for the manufacture of the actual PCB 
itself, but the files will also be used in other areas of the manufacturing process. They may be used to develop a pick and place programme, and in addition to this 
the files may be used in the manufacture of a PCB solder mask for adding solder paste to the board prior to component placement. The files may also be used for 
developing various forms of test programme such as an "In-Circuit Test" (ICT), and particularly in developing any bed of nails test fixture. In this way, the PCB 
design is a crucial element of the whole manufacturing process for any product. The PCB design is more than just a design for the basic board.