Joy Technology Co.,Limited

CM series Nozzle should be pay attention what the problem 

we have to take the CM nozzle should pay attention to what are the problems?

First of all we take the CM nozzle when the need to pay attention to the hand must not touch the reflector.

In addition, other things can not scratch it, it is likely that this will cause damage to the reflector, because the human hand will be the secretion of sweat and other ingredients, will affect the recognition effect. Anti-rust oil cleaning CM nozzle should pay attention to the problem.
First, in addition to playing 0201 small material (ie, 205/206), the other as long as there is no corrosive solvent can be, of course, if the conditions, then use a special cleaning machine for cleaning is the best.

Second, no matter what method to deal with the reflective plate as far as possible can not have physical damage.

Second, we usually in the maintenance of packaging must be NOZZLE separate, can not be crowded together, including the removal and installation of the time, must not let Nozzle's mouth to meet the reflective surface, can not cause scratches to the reflector.

Fourth, to ensure that the maintenance of contact with the reflective surface for too long, be sure to clean it in a timely manner. If it is off, then the manufacturers are generally assembled when not assembled, for this situation can be asked to replace. Of course, you can also use their own glue sticky, sticky time can not clear the back of the black plate object! But did not grasp the words, the proposal is returned to allow manufacturers to deal with.