Summary of SMT Nozzle maintenance method
For SMT Nozzle maintenance methods, how to maintain SMT Nozzle as follows：
1. Check whether the terminals of the applicator nozzle are deformed and sub-wear due to the impact, and confirm whether there is debris clogging inside the nozzle.
2. Press the nozzle to confirm whether the elasticity is tight.If you press the nozzle, feel the elasticity is very tight, please use the washing liquid to wash the inside of the mouth.If the wear of the nozzle you need to replace the new product.
3. Remove the nozzle foreign body: the PIN through the nozzle diameter, the washing liquid spray nozzle with the nozzle hole, sprayed after about a minute, from the nozzle side of the air pressure to launch. Remove the liquid residue in the nozzle hole, to use air pressure to blow it clean.
4. Remove the mouth of the wick and the side of the foreign body: with a cloth washed with detergent wipe the mouth and side of the mouth to remove foreign body.If you use the above method is still unable to remove foreign body, the suction liquid applied to On the foreign body, after about a minute, repeat the above operation, in order to prevent the cleaning solution remaining on the nozzle, use a clean cloth to wipe the nozzle.
If you are looking for smt nozzle or enquiry，pls feel free to contact us directly.
Panasonic CM202 CM402 CM602 NPM Nozzle 110 115 KXFX0383A00
Samsung SM320 IC tray
YAMAHA FEEDER CALIBRATION JIG